Precautions for wearing raincoats

Note: The raincoat raincoat should lift the collar when it encounters water,raincoat gently shake off the water drops, and do not wipe it with your hands or towels,raincoat in order to reduce the rainproof performance. After the water drops shake, let them dry in a cool place, and when they are almost eight or nine thousand,raincoat iron them once to maintain the waterproof performance. It should be dried in the collection, not squeezed.

After the raincoat and raincoat are drenched, they should be dried in a cool place,raincoat not in the sun and fire, to prevent the adhesive layer from becoming sticky. Normally, do not contact with oil,raincoat wash with gasoline, and dry when storing. It is best to sprinkle some talcum powder. Pay attention to frequent inspections, raincoat if any adhesion is found, it should be spread out to dry in time.

Plastic raincoats only need to be cleaned with a soft cloth after rain,raincoat do not expose to the sun or fire, generally do not use soap with excessive alkali. If the plastic raincoat is wrinkled,raincoat it can be immersed in hot water at 80℃ for one or two minutes, and the wrinkle can be eliminated. If any cracks or holes are found,raincoat you can repair them by yourself. First cut a piece of plastic cloth that is larger than the hole and cover it with a thin wire mesh (or wooden board). Use a hot iron to iron the hole or crack. Closed. After the plastic raincoat is cracked,raincoat do not sew on the needle thread, otherwise the hole will become bigger and bigger.